| | |
|
| |
| | |
|
|
Seametrics TX115B Hot-Tap Adjustable Depth Insertion Meter 3" to 10"
|
|
MSRP: $1,027.00
Price: $697.00
You Save: $330.00 (32 %)
Quantity in stock: 2
Item Number: TX115B-04
Manufacturer: SeaMetrics
Manufacturer Part No: TX115B-04
|
x
TX100/200-SERIES Insertion Turbine Flow Sensor
FEATURES
Wide flow range
One moving part
Hot tap available
Modular electronics compatible
Easily depth adjustable for 3-48” pipe
APPLICATIONS
Clean water
Large pipes
Aquariums, water parks
Water & wastewater monitoring
GENERAL INFORMATION
The TX100/200-Series are adjustable depth insertion turbinesthat come in brass or 316 stainless models to fit 3” to 48” pipe. Installation fittings are standard 1-1/2" (101/201) or 2” (115/215) FNPT. Fittings such as saddles and weldolets may be purchased either locally or from Seametrics.
Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can be sent for hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC’s and other controls without any additional electronics.
If desired, a modular system of electronics can be installed directly on the flow sensor or mounted remotely. The FT415 (battery powered) or FT420 (loop powered) provides digital rate and total display, as well as programmable pulse; the FT420 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10.
The “hot-tap” models (TX115/215) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation
on the pipe fitting. In most circumstances, no special tool is required.
SPECIFICATIONS
| Power Source
|
Standard / Micropowered (-04 Option)
|
| Supply Voltage/Current
|
6-40 Vdc/< 2 mA 3.5-16 Vdc/60 μA @ 3.5 Vdc
|
| Sensor Type
|
Magnetoresistive / Magnetoresistive
|
| Output
|
Current Sinking Pulse / Current Sinking Pulse
|
| Sinking Current
|
100 mA max / 2 mA max
|
External Pull-up Resistor
|
3-40 Vdc / Supply Voltage
|
Pipe Size
|
TX101/115 / TX201/215 3” - 10” (50 - 250mm) 10” - 48” (250 - 1200mm)
|
Materials Housing
|
Cast aluminum
|
Sensor Body
|
Brass or 316 SS
|
Rotor
|
Polypro standard (PVDF optional)
|
Shaft/Bearings
|
Nickel-bound tungsten carbide/Ruby
|
Isolation V
|
TX101/201 / TX115/215 None / Bronze (316SS optional)
|
Fitting Size
|
1-1/2” NPT / 2” NPT
|
Flow Range
|
0.2 - 30 feet/sec (0.006 - 9 meter/sec)
|
Accuracy
|
+/-1.5% of full scale
|
Maximum Temperature
|
200˚ F (93˚ C)
|
Maximum Pressure
|
200 psi (14 bar)
|
Insertion Force
|
0.44 x pressure in pipe
|
Cable
|
#22 AWG 3-con, 18’ (6m); 2,000’ (650m) maximum cable run
|
|
x
|
Product Reviews
|
|
|