CS402

        CS-402 Closed System Treatment

Helps Prevent Corrosion in Closed Hot and Chill Water Systems

• Unique blend of Nitrite/Borax based corrosion control compounds for iron and steel metal protection.  CS-402 is clear at use concentration.
• Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, Copper and Brass.
• Has a dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
• Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
• pH buffered with a Borax for long term pH stability.
• Utilizes a polymeric dispersant to help reduce Calcium hardness scale from forming on heat exchanger surfaces.
• Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.

• CS-402 should be fed at a rate of 1 gallon per 200 gallons of water in the closed system.
• Use Nitrite Test Kit P.N.# CNTK3300-Z to test for CS-402.  The recommended test range is 800 - 1200 ppm as Sodium Nitrite.

Refer to the MSDS for further health, safety and environmental information regarding this product. Information and recommendations in this bulletin are based on information believed to be reliable. However, the use of the product is beyond the control of Cannon Water Technology Inc. and no guarantee, expressed or implied, is made as to the effects of such the results to be obtained if not used in accordance with directions or established safe practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other material