CST Closed System Treatment (EcoGreen Series)

ECO-Green – CST Closed System Treatment

Safe – Helps Prevent Corrosion in Closed Hot and Chill Water Systems

• Super concentrated: 1 – 2 gallons treats 1000 gallons of closed chill, hot and condenser water.
• Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, Copper and Brass.
• Has a dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
• Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
• pH buffered with a Borax for long term pH stability.
• Less likely to be degraded by bacteria than other closed system corrosion inhibitors.
• Can be used in systems currently treated with nitrite/phosphate/phosphonates based corrosion inhibitors.
• Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.

• ECO-Green - CST should be fed at a rate of 1 -2 gallons per 1000 gallons of water in the closed system.
• Use O.P. Test Kit P.N.#CNPK158 to test ECO-Green - CST.  The recommended test range is 25 – 40 total drops. 
• ECO-Green - CST can be shipped UPS in small containers.

Refer to the MSDS for further health, safety and environmental information regarding this product. Information and recommendations in this bulletin are based on information believed to be reliable. However, the use of the product is beyond the control of Cannon Water Technology Inc. and no guarantee, expressed or implied, is made as to the effects of such the results to be obtained if not used in accordance with directions or established safe practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other material