SenSafe Hydrogen Sulfide Test Strips, Low Range

 

The Low Range H₂S Test has detection limits From 0 to 2ppm (mg/L) with a low sensitivity of 0.3ppm (mg/L). With this test, the strip is inserted into the aqueous sample for 20 seconds with back and forth motion. After 20 seconds, the strip is removed and discarded. The remaining discolored sample is compared to the color chart specific for this water quality test.

 

Sensitivity: 0, 0.3, 0.5, 1.0, 2.0 ppm (mg/L)

Time to test: 1 Minute, 20 Seconds

Total Tests: 30 individually sealed test strips

Contains: 2 plastic sample containers, 30 test strips, 1 color comparison chart.

 

Who needs this test? Anyone who has hydrogen sulfide in their water also known to cause "Rotten Egg Smell"